The installation position of the swing check valve is not restricted. It can be installed on horizontal, vertical or inclined pipelines. If installed on a vertical pipeline, the medium flow direction must be from bottom to top

Quality control of the main body blank. All parts of this valve are forgings. During forging, they are strictly carried out in accordance with the forging process regulations and process cards. The initial forging temperature, final forging temperature, deformation degree and deformation speed are s......

wing check valve: The disc of the swing check valve is disc-shaped and rotates around the rotating axis of the valve seat channel. Because the channel in the valve is streamlined, the flow resistance is smaller than that of the lift check valve. It is suitable for large-diameter occasions with low f......

There are many types of check valves, and different types of check valves are suitable for different occasions. The main occasions where check valves are often used include

Check valve refers to a valve that relies on the flow of the medium itself to automatically open and close the valve disc to prevent the backflow of the medium. The check valve is an automatic valve whose main function is to prevent the backflow of the medium and prevent the pump and drive motor fro......

Swing check valve: It is suitable for large-diameter occasions with low flow rate and infrequent flow changes, but it is not suitable for pulsating flow. It is mainly used to prevent the medium from stopping or backflowing and weakening the hydraulic impact. It is divided into three forms: single-fl......