English
Español 
Português 
русский 
Français 
日本語 
Deutsch 
tiếng Việt 
Italiano 
Nederlands 
ภาษาไทย 
Polski 
한국어 
Svenska 
magyar 
Malay 
বাংলা ভাষার 
Dansk 
Suomi 
हिन्दी 
Pilipino 
Türkçe 
Gaeilge 
العربية 
Indonesia 
Norsk 
تمل 
český 
ελληνικά 
український 
Javanese 
فارسی 
தமிழ் 
తెలుగు 
नेपाली 
Burmese 
български 
ລາວ 
Latine 
Қазақша 
Euskal 
Azərbaycan 
Slovenský jazyk 
Македонски 
Lietuvos 
Eesti Keel 
Română 
Slovenski 
मराठी 
Srpski језик
Products
Tianjin Milestone Valve Company was one of China Knife Gate Valve, Globe Valve and Flanged Butterfly Valve manufacturers and suppliers, was established in 2019 merged a valve factory in Tianjin. After absorbing the strength of previous factory, now we become a professional manufacturing enterprise in the industry, with patent products: large diameter flange butterfly valve, double clip butterfly valve, fully lined rubber butterfly valve and groove butterfly valve.
- View as
4 inch Ball Valve
A 4 inch ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. The ball has 4 inch(100 mm)nominal diameter. It is used in the pipeline to cut, distribute and change the flow direction of the medium. Ball valves feature small torque value, good sealing performance and easy operation.
Read MoreSend Inquiry
Vertical Check Valve
Vertical check valve is a check valve similar to the lift check valve. However, this valve generally has a spring that will 'lift' when there is pressure on the upstream side of the valve. The pressure needed on the upstream side of the valve to overcome the spring tension is called the 'cracking pressure'. When the pressure going through the valve goes below the cracking pressure, the spring will close the valve to prevent back-flow in the process.
Read MoreSend Inquiry
2 Inch Check Valve
2 Inch Check Valve is a type of valve that allows liquids, gases, and steam to flow in only one direction. The diameter of the valve is 2 inch. A check valve can have a ‘stopping’ mechanism that can be shaped like a ball, disc, piston, or poppet. The valve is connected by thread and pipe.
Read MoreSend Inquiry
Wafer Check Valves
The Wafer check valves are self-acting and fast-closing valves which prevent a working medium from flowing back in a pipeline. They are used in order to prevent from backflow the pumps, fans etc. TWafer check valve is not a shut-off valve.
Read MoreSend Inquiry
Gate Valve for Sewer Line
A gate valve for sewer liner is used to prevent waste water from entering into a building from the public sewer system is exposed to corrosive water, waste, grit, and other solids. For that reason this type of valve use a knife edge gate. A knife edged gate is specifically designed for controlling the flow of a wide variety of materials, such as found in pulp plant, paper plants, mining, and waste water treatment plants who’s flow contains solid materials.
Read MoreSend Inquiry
Check Valve for Water Pump
Check valve for water pump is a valve that is used to prevent backflow in a piping system. The pressure of the liquid passing through the pipe will open the valve, while any reversal of flow will close the valve. The check valve will help your water system maintain pressure when the pump shuts off and also prevent backspin, upthrust, and water hammer.
Read MoreSend Inquiry
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy