The Flat Panel Gate Valve is a sliding valve whose closing member is a parallel gate. The closing part can be a single gate or a double gate with a spreading mechanism in between. The Flat Panel Gate Valve produced by Milestone Valve Company has diversion hole flat gate valve, non-diversion hole flat gate valve, oil field flat gate valve, pipeline flat gate valve and gas flat gate valve according to the purpose and use occasion. The product quality is high-end, the performance is stable, and the majority of users have received good feedback.
|Type of Valve||Flat Panel Gate Valve|
|Design Temperature Range||-29℃～121℃|
|Actuator type||Manual drive, Pneumatic, Hydraulic or electric Actuator|
|Applicable Medium||Water, oil, gas, and various corrosion medium|
Material of main parts
|Body 、Bonnet、Disc||Cast iron, Ductile Iron, Cast steel, Stainless Steel,|
|Sealing surface||Bronze, stainless steel, hard alloy NBR, epdm|
|Sealing Shim||Enhanced flexible graphite, 1Cr13/flexible graphite|
|Packing||O-ring, flexible graphite|
1) Flat Panel Gate Valve adopts floating valve seat, two-way opening and closing, reliable sealing, flexible opening and closing.
2) The Flat Panel Gate Valve has a high load-bearing capacity and a straight-through channel. When fully opened, it is similar to a straight pipe through the gate orifice, and the flow resistance is very small. The valve stem adopts composite packing and multiple seals, which makes the seal reliable and low friction.
3) When the Flat Panel Gate Valve closes the valve, turn the handwheel clockwise to move the gate down to the bottom. Due to the pressure of the medium, the seal seat at the inlet end is pushed toward the gate to form a larger seal specific pressure. The first seal. At the same time, the gate is pressed against the seal seat at the outlet end to form a double seal.
5) When the Flat Panel Gate Valve opens the gate, turn the handwheel counterclockwise to move the gate, and the diversion hole and the passage hole are connected. As the ram rises, the through hole gradually increases. When it reaches the limit position, the diversion hole and the channel hole overlap, and then it is fully opened.
1) Flat Panel Gate Valve is suitable for PN1.0～16.0MPa, working temperature -29～121℃ for oil and natural gas pipelines. The flat gate valve with diversion hole is also easy to clean the pipeline.
2) Flat Panel Gate Valve is suitable for the transportation pipeline and storage equipment of refined oil.
3) Flat Panel Gate Valve is suitable for pipelines with suspended particles and city gas pipelines.
4) Flat Panel Gate Valve is suitable for tap water projects.
If you want to customize, please contact:
Mobile phone: 86-15033798686
Email: [email protected]
1. Can i have a sample order for valve ?
A: Yes, we welcome sample order to test and check the quality, Mixed sample are accepted.
2. Do you have any MOQ limit for valve order ?
A: Low MOQ, 1 PC for sample checking is avaible.
3. Could you offer OEM service ?
A: Yes, OEM is availble.
4. How about the payment ?
A: We normally accept 30% deposit, and balance will be paid before shipping. L7C is OK
5. Whafs the delivery time of your butterfly valves?
A: For most of the sizes,DN50-DN600,we have stock of valve parts,it*s possible to deliver in 1-3 weeks,to nearest seaport Tianjin.
6. Whafs the warranty of your products?
A:We normally offer 12 months of warranty in service or 18 months since shipping date.
7. What is your products standardization?
A: GB/T12238-2008, JBfT 8527-1997, API 609,EN 593-1998, DIN 85003-3-1997