Manual Ball Valve is a valve in which the opening and closing part ball is driven by a manual valve stem and rotates around the axis of the ball valve. The Manual Ball Valve is installed horizontally on half of the pipeline. Different materials can be applied to pipelines with different media to control the valve body. The Manual Ball Valve produced by Milestone Valve Company is made of high-quality materials, which not only has good sealing performance, but also can be used in High temperature and high pressure resistant pipeline applications, nominal diameter is D15-D250, nominal pressure 1.6-20Mpa, wide range of applications and media, and has been well received by users.
|Type of Valve||Manual Ball Valve|
|Design Temperature Range||-15℃～425℃|
|Actuator type||Manual drive|
|Applicable Medium||Water, oil, gas, and various corrosion medium|
|Body||Forged steel, Cast steel, Stainless Steel,|
|Ball||Forged steel, Cast steel, Stainless Steel,|
|Stem||Forged steel, Stainless Steel,|
|Seat ring||Forged steel, Stainless Steel,|
|Seat||PTFE, RPTFE, NYLON, PEEK, PPL, POM, DEVLON|
|Gasket||Stainless Steel, flexible graphite spiral wound|
|Packing||PTFE, flexible graphite|
1) The two-piece Manual Ball Valve consists of two parts, and the sealing effect is better than that of the one-piece ball valve. The diameter of the ball is the same as that of the pipe, and it is easier to disassemble than the one-piece ball valve.
2) The three-piece Manual Ball Valve consists of three parts, the valve cover on both sides and the middle valve body, which is convenient for disassembly and maintenance. Stronger pressure resistance.
1) The Manual Ball Valve is wear-resistant; since the hard-seal valve core of the Manual Ball Valve is spray welded with alloy steel, and the sealing ring is welded with alloy steel, the hard-seal Manual Ball Valve will not produce too much wear when it is switched on and off.
2) The Manual Ball Valve has good sealing performance; because the manual ball valve is sealed by manual grinding, it cannot be used until the valve core and the sealing ring are completely matched. Therefore, its sealing performance is reliable.
3) The Manual Ball Valve switch is light and has a long service life;
In addition to being used in people's daily life, Manual Ball Valve can also be used in various industries such as petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, rockets, etc. It is suitable for various media such as water, solvents, acids and natural gas.
If you want to customize, please contact:
Mobile phone: 86-15033798686
Email: [email protected]
1. Can i have a sample order for valve ?
A: Yes, we welcome sample order to test and check the quality, Mixed sample are accepted.
2. Do you have any MOQ limit for valve order ?
A: Low MOQ, 1 PC for sample checking is avaible.
3. Could you offer OEM service ?
A: Yes, OEM is availble.
4. How about the payment ?
A: We normally accept 30% deposit, and balance will be paid before shipping. L7C is OK
5. Whafs the delivery time of your butterfly valves?
A: For most of the sizes,DN50-DN600,we have stock of valve parts,it*s possible to deliver in 1-3 weeks,to nearest seaport Tianjin.
6. Whafs the warranty of your products?
A:We normally offer 12 months of warranty in service or 18 months since shipping date.
7. What is your products standardization?
A: GB/T12238-2008, JBfT 8527-1997, API 609,EN 593-1998, DIN 85003-3-1997